flame retardant STA power cable( PVC insulation)

flame retardant STA power cable( PVC insulation) 1 PVC insulated cable 2 copper or aluminum core 3 steel tape armour 4 PE

flame retardant  STA power cable(PVC insulation)

voltage:0.6/1kv    standaeds: IEC60502 GB/T12706

The cable is used in power distribution networks or fixed installations for industrial equipments with rated voltage up to 35KV.The cable is produced according to the standards of GB IEC BS DIN ASTM upon request.

Nominal cross-section:single core from 1.5sqmm to 800sqmm

                                 multi core from 1.5sqmm to 400sqmm

cable types

VY VLY: Cu/Al conductor PVC insulated and PE sheathed power cable

YJY YJLY:Cu/Al conductor XLPE insulated and PE sheath power cable

( The above cables is for indoors/tunnel/cable trench, unable to bear external mechanical forces. single core cable is not permissible to lay in magnetic duct.)

VV23  VLV23: Cu/Al conductor PVC insulated steel tape armoured and PE sheath

YJV23 YJLV23:Cu/Al conductor XLPE insulated steel tape armoured and PE sheath

VV33 VLV33:Cu/Al conductor PVC insulated steel wire armoured and PE sheath

YJV33 YJLV33:Cu/Al conductor XLPE insulated steel wire armoured and PE sheath

 (The above cables is for laying indoors or direct in ground, able to bear external mechanical forces,but unable to bear large pulling forces.)

operating characteristics

1.max permissible continuous operating temperature of conductor is 90°C

2.the ambient temperature under installation shall not below 0 °C 

3.the bending radius of single core cable shall not less than 20D and three-cores shall not less than 15D.

4.max short-circuit temperature of conductor should not exceed 250°C( 5s max duration ). 

welcome to contact me

Jack Wu(Mr.)

TEL: 86 574 87273098   FAX: 86 574 87276098

MOBILE: 86 15968466895

  

  

flame retardant STA power cable( PVC insulation)